bernette 64 AIRLOCK vs Janome AT 2000D
Technical comparison · Overlockers and sergers
Two overlockers with air threading for the loopers and the same manufacturer-declared speed, 1300 stitches per minute. The set-up differs: the bernette 64 AIRLOCK has a free arm and a knee lift, the Janome AT 2000D a built-in needle threader and adjustable cutting and pressure.
| Parameter | ||
|---|---|---|
| Identity | ||
| Use tier | F2 — Intermediate | F3 — Advanced |
| Price | ||
| Price | ~1000–2200 € | ~1000–2200 € |
| Universal specs | ||
| Dimensions (W×D×H) | — | 34.7 × 28.4 × 29.9 cm |
| Weight | — | 7.9 kg |
| Category specs | ||
| Maximum threads | — | 4 |
| Needle system | ELx705 | — |
| Available stitches | 16 | — |
| Stitch types | 4-thread overlock, 3-thread overlock, 2-thread overlock, 3-thread stretch overlock, 3-thread flatlock, 2-thread flatlock, Narrow 3-thread overlock, 3-thread rolled hem, 2-thread rolled hem, 2-thread wrapped edge | — |
| 2-thread conversion | — | Built-in |
| Differential feed ratio (minimum) | — | 0.5 |
| Differential feed ratio (maximum) | — | 2 |
| Stitch length (minimum) | — | 1 mm |
| Stitch length (maximum) | — | 5 mm |
| Overlock width (minimum) | 3 mm | — |
| Overlock width (maximum) | 7 mm | — |
| Looper threading | Air (jet-air) | Air (jet-air) |
| Needle threader | Manual | Built-in |
| Rolled hem conversion | — | Lever |
| Retractable upper knife | — | Yes |
| Adjustable cutting width | — | Yes |
| Tension system | — | Manual dials |
| Free arm | Yes | — |
| Space to the right of the needle | 130 mm | — |
| Presser foot lift | — | 5.5 mm |
| Knee lifter | Yes | — |
| Adjustable presser foot pressure | — | Yes |
| Maximum speed | 1300 spm | 1300 spm |
| Waste collector | Yes | Yes |
The differences that matter
- Needle threader: manual on the bernette, built in on the Janome → on the Janome threading the needle takes no hand work.
- 2-thread conversion: built in on the Janome → the change needs no accessory.
Which one to choose
Choose bernette 64 AIRLOCK if…
On Monday morning you work pieces that must pass to the right of the needle: you get 130 mm, with a free arm and a knee lift that raises the presser foot without taking your hands off the fabric. The trade-off: the needle is threaded by hand.
Choose Janome AT 2000D if…
On Monday morning you move from one fabric to another and want to adjust things: differential feed from 0.5 to 2, stitch length from 1 to 5 mm, a disengageable upper knife, adjustable cutting width and presser foot pressure, and a lever for the rolled hem. The 2-thread conversion and the needle threader are built in. The trade-off: tension is set with manual dials.
Where to buy
Paid link: the price for you does not change.
As an Amazon Associate I earn from qualifying purchases.
The purchase links are the same as on the two product pages and don't influence the verdict. The product pages have the complete data.