bernette 64 AIRLOCK vs Elna eXtend 864air
Technical comparison · Overlockers and sergers
Two overlockers with air threading for the loopers and 1300 stitches per minute, a manufacturer-declared value. The equipment differs: the bernette 64 AIRLOCK has 16 stitches, a free arm and 130 mm to the right of the needle; the Elna eXtend 864air has a built-in needle threader, 13 stitches and an overlock that starts at 5.5 mm.
| Parameter | ||
|---|---|---|
| Identity | ||
| Use tier | F2 — Intermediate | F3 — Advanced |
| Price | ||
| Price | ~1000–2200 € | ~1000–2200 € |
| Universal specs | ||
| Dimensions (W×D×H) | — | 34.7 × 28.4 × 29.9 cm |
| Weight | — | 7.9 kg |
| Category specs | ||
| Maximum threads | — | 4 |
| Needle system | ELx705 | — |
| Needles, minimum | — | 1 |
| Needles, maximum | — | 2 |
| Available stitches | 16 | 13 |
| Stitch types | 4-thread overlock, 3-thread overlock, 2-thread overlock, 3-thread stretch overlock, 3-thread flatlock, 2-thread flatlock, Narrow 3-thread overlock, 3-thread rolled hem, 2-thread rolled hem, 2-thread wrapped edge | 4-thread overlock, 3-thread overlock, 3-thread rolled hem, 3-thread flatlock, 2-thread flatlock, 2-thread rolled hem |
| 2-thread conversion | — | Built-in |
| Differential feed ratio (minimum) | — | 0.5 |
| Differential feed ratio (maximum) | — | 2 |
| Stitch length (minimum) | — | 1 mm |
| Stitch length (maximum) | — | 5 mm |
| Overlock width (minimum) | 3 mm | 5.5 mm |
| Overlock width (maximum) | 7 mm | 7.5 mm |
| Looper threading | Air (jet-air) | Air (jet-air) |
| Needle threader | Manual | Built-in |
| Rolled hem conversion | — | Lever |
| Adjustable cutting width | — | Yes |
| Tension system | — | Manual dials |
| Free arm | Yes | — |
| Space to the right of the needle | 130 mm | — |
| Presser foot lift | — | 5.5 mm |
| Knee lifter | Yes | — |
| Adjustable presser foot pressure | — | Yes |
| Maximum speed | 1300 spm | 1300 spm |
| Waste collector | Yes | Yes |
The differences that matter
- Minimum overlock width: 3 mm against 5.5 mm → the bernette goes down to narrower edges.
- Needle threader: manual on the bernette, built in on the Elna → on the Elna threading the needle takes no hand work.
- Stitch types: ten on the bernette, six on the Elna → stretch overlock, wrapped edge and narrow overlock appear only on the bernette.
Which one to choose
Choose bernette 64 AIRLOCK if…
On Monday morning you have different finishes to alternate: narrow 3-thread overlock, stretch, wrapped edge, flatlock and rolled hems, with overlock width from 3 to 7 mm. You get 130 mm to the right of the needle, a free arm and a knee lift. The trade-off: the needle is threaded by hand.
Choose Elna eXtend 864air if…
On Monday morning you sew wide overlock seams and want to adjust: differential feed from 0.5 to 2, stitch length from 1 to 5 mm, adjustable cutting width and presser foot pressure, built-in 2-thread conversion, a lever for the rolled hem. The needle threads itself. The trade-off: overlock width does not go below 5.5 mm and there are 13 stitches against 16.
Where to buy
Paid link: the price for you does not change.
As an Amazon Associate I earn from qualifying purchases.
The purchase links are the same as on the two product pages and don't influence the verdict. The product pages have the complete data.