bernette 64 AIRLOCK vs BERNINA L 460

Technical comparison · Overlockers and sergers

In brief

Two overlockers with 16 stitches where the difference lies in threading and adjustment: the bernette 64 AIRLOCK threads the loopers by air, the BERNINA L 460 by hand and leaves adjustment to manual dials, with overlock width up to 9 mm.

Parameter
Identity
Use tier F2 — Intermediate F3 — Advanced
Price
Price ~1000–2200 € ~1000–2200 €
Universal specs
Dimensions (W×D×H) — 32 × 30.5 × 29.5 cm
Weight — 9.8 kg
Category specs
Maximum threads — 4
Needle system ELx705 —
Needles, minimum — 1
Needles, maximum — 2
Available stitches 16 16
Stitch types 4-thread overlock, 3-thread overlock, 2-thread overlock, 3-thread stretch overlock, 3-thread flatlock, 2-thread flatlock, Narrow 3-thread overlock, 3-thread rolled hem, 2-thread rolled hem, 2-thread wrapped edge 4-thread overlock, 3-thread overlock, Narrow 3-thread overlock, 3-thread stretch overlock, 3-thread flatlock, 2-thread flatlock, 3-thread rolled hem, 2-thread rolled hem, 2-thread wrapped edge, 2-thread overlock
Differential feed ratio (minimum) — 0.7
Differential feed ratio (maximum) — 2
Stitch length (minimum) — 0.8 mm
Stitch length (maximum) — 4 mm
Overlock width (minimum) 3 mm 3 mm
Overlock width (maximum) 7 mm 9 mm
Looper threading Air (jet-air) Manual
Needle threader Manual Manual
Rolled hem conversion — Lever
Knife drive — Upper thread
Adjustable cutting width — Yes
Tension system — Manual dials
Free arm Yes —
Space to the right of the needle 130 mm —
Knee lifter Yes Yes
Adjustable presser foot pressure — Yes
Maximum speed 1300 spm 1500 spm
Waste collector Yes —

The differences that matter

  • Looper threading: air on the bernette, manual on the BERNINA → every thread change involves a different amount of hand work.
  • Overlock width: 7 mm against 9 mm (declared maximum) → 9 mm matters only for edges that need it; otherwise adjustment is what counts.

Which one to choose

Choose bernette 64 AIRLOCK if…

On Monday morning you change thread often, for garments in different colours, and don't want to thread the loopers by hand: threading is by air. You get a free arm and 130 mm to the right of the needle for moving the work through. The trade-off: overlock width reaches 7 mm and declared top speed is 1300 stitches per minute.

See the bernette 64 AIRLOCK sheet →

Choose BERNINA L 460 if…

On Monday morning you finish wide edges and want to adjust everything: overlock width reaches 9 mm, differential feed runs from 0.7 to 2, stitch length from 0.8 to 4 mm, and cutting width and presser foot pressure are adjustable. The rolled hem is set with a lever and declared top speed is 1500 stitches per minute. The trade-off: the loopers are threaded by hand and the machine weighs 9.8 kg.

See the BERNINA L 460 sheet →

Where to buy

Paid link: the price for you does not change.

As an Amazon Associate I earn from qualifying purchases.

The purchase links are the same as on the two product pages and don't influence the verdict. The product pages have the complete data.