Baby Lock Enlighten vs Janome AT 2000D
Technical comparison · Overlockers and sergers
Two four-thread sergers, both with air-threaded loopers. What separates them is how tension is set: automatic on the Enlighten, by dials on the Janome AT 2000D, which also reaches a 5 mm stitch against 4 mm.
| Parameter | ||
|---|---|---|
| Identity | ||
| Use tier | F2 — Intermediate | F3 — Advanced |
| Price | ||
| Price | — | ~1000–2200 € |
| Universal specs | ||
| Dimensions (W×D×H) | 33.66 × 26.67 × 26.04 cm | 34.7 × 28.4 × 29.9 cm |
| Weight | 7.48 kg | 7.9 kg |
| Category specs | ||
| Maximum threads | 4 | 4 |
| Needles, maximum | 2 | — |
| Stitch types | Wave stitch | — |
| 2-thread conversion | — | Built-in |
| Differential feed | Yes | — |
| Differential feed ratio (minimum) | — | 0.5 |
| Differential feed ratio (maximum) | — | 2 |
| Stitch length (minimum) | — | 1 mm |
| Stitch length (maximum) | 4 mm | 5 mm |
| Overlock width (maximum) | 7.5 mm | — |
| Looper threading | Air (jet-air) | Air (jet-air) |
| Needle threader | — | Built-in |
| Rolled hem conversion | — | Lever |
| Retractable upper knife | — | Yes |
| Adjustable cutting width | — | Yes |
| Tension system | Automatic | Manual dials |
| Presser foot lift | — | 5.5 mm |
| Adjustable presser foot pressure | — | Yes |
| Maximum speed | — | 1300 spm |
| Waste collector | — | Yes |
The differences that matter
- Automatic tension against dials → on the Janome every fabric needs its own setting.
- Stitch up to 4 mm against up to 5 mm → the Janome covers lengths the Enlighten does not reach.
- Built-in needle threader and 2-thread conversion on the Janome → switching to two threads needs no accessory.
- 5.5 mm presser foot lift and adjustable pressure on the Janome → the foot is adapted to the thickness being sewn.
Which one to choose
Choose Baby Lock Enlighten if…
For changing fabric and thread on every job without touching the tension: it is automatic. The overlock width goes up to 7.5 mm. The trade-off is a stitch that stops at 4 mm and no dials to adjust by hand.
Choose Janome AT 2000D if…
For setting the machine up by hand and also sewing rolled hems: 2-thread conversion is built in, a lever prepares the rolled hem, the needle threader is built in, presser foot pressure is adjustable and the stitch reaches 5 mm. Tensions are by dial and set by hand; the speed is 1300 stitches per minute, as declared by the manufacturer.
Where to buy
Paid link: the price for you does not change.
As an Amazon Associate I earn from qualifying purchases.
The purchase links are the same as on the two product pages and don't influence the verdict. The product pages have the complete data.