Baby Lock Enlighten vs BERNINA L 460

Technical comparison · Overlockers and sergers

In brief

Two four-thread sergers, one mid-range and one advanced. The choice comes down to how much you want automated: the Enlighten threads its loopers with air and sets tension on its own, while the BERNINA L 460 leaves both to the hands and offers more room for adjustment in return.

Parameter
Identity
Use tier F2 — Intermediate F3 — Advanced
Price
Price — ~1000–2200 €
Universal specs
Dimensions (W×D×H) 33.66 × 26.67 × 26.04 cm 32 × 30.5 × 29.5 cm
Weight 7.48 kg 9.8 kg
Category specs
Maximum threads 4 4
Needles, minimum — 1
Needles, maximum 2 2
Available stitches — 16
Stitch types Wave stitch 4-thread overlock, 3-thread overlock, Narrow 3-thread overlock, 3-thread stretch overlock, 3-thread flatlock, 2-thread flatlock, 3-thread rolled hem, 2-thread rolled hem, 2-thread wrapped edge, 2-thread overlock
Differential feed Yes —
Differential feed ratio (minimum) — 0.7
Differential feed ratio (maximum) — 2
Stitch length (minimum) — 0.8 mm
Stitch length (maximum) 4 mm 4 mm
Overlock width (minimum) — 3 mm
Overlock width (maximum) 7.5 mm 9 mm
Looper threading Air (jet-air) Manual
Needle threader — Manual
Rolled hem conversion — Lever
Knife drive — Upper thread
Adjustable cutting width — Yes
Tension system Automatic Manual dials
Knee lifter — Yes
Adjustable presser foot pressure — Yes
Maximum speed — 1500 spm

The differences that matter

  • Air threading and automatic tension vs manual threading and dials → thread changes are quicker on the Enlighten; on the L 460 every detail is set by hand.
  • Overlock width up to 7.5 mm vs up to 9 mm → the L 460 covers wider edges.
  • Differential feed (the feed dog that sets how fabric advances) adjustable from 0.7 to 2 on the L 460 → fabric advance can be matched to the material.

Values declared by the manufacturer.

Which one to choose

Choose Baby Lock Enlighten if…

You sew a handful of different jobs but change thread colour often: air threading and automatic tension save re-threading the loopers by hand and turning dials at every change. The trade-off: the overlock width is smaller than the L 460's.

See the Baby Lock Enlighten sheet →

Choose BERNINA L 460 if…

You use one machine for edges of different widths and often have your hands full of fabric: the L 460 declares a knee lifter, operated with the leg, and an overlock width adjustable from 3 mm. The trade-off: the loopers are threaded by hand and tension is set with dials at every thread change.

See the BERNINA L 460 sheet →

Where to buy

Paid link: the price for you does not change.

As an Amazon Associate I earn from qualifying purchases.

The purchase links are the same as on the two product pages and don't influence the verdict. The product pages have the complete data.