Baby Lock Acclaim vs Janome MyLock 644D

Technical comparison · Overlockers and sergers

In brief

Both set their own tension, and what decides the choice is overlock width: the Baby Lock Acclaim reaches a much wider edge, while the Janome MyLock 644D stops sooner but has the rolled-hem lever and differential feed. Figures quoted are manufacturer-declared.

Parameter
Identity
Use tier F2 — Intermediate F2 — Intermediate
Price
Price ~2200–5000 € 649 €
Category specs
Maximum threads 4 4
Needles, maximum 2 —
Stitch types 2-thread overlock, 3-thread overlock, 4-thread overlock, Wave stitch 2-thread overlock, 3-thread overlock, 4-thread overlock
2-thread conversion Built-in With accessory
Differential feed ratio (minimum) — 0.5
Differential feed ratio (maximum) — 2.2
Stitch length (minimum) 0.75 mm 1 mm
Stitch length (maximum) 4 mm 5 mm
Overlock width (minimum) 1.5 mm 3.1 mm
Overlock width (maximum) 7.5 mm 5.1 mm
Looper threading Air (jet-air) Assisted
Needle threader Built-in Manual
Rolled hem conversion — Lever
Adjustable cutting width — Yes
Tension system Automatic Automatic
Presser foot lift 6 mm —
Adjustable presser foot pressure Yes —
Maximum speed 1500 spm —
Waste collector — Yes

The differences that matter

  • Maximum overlock width 7.5 mm on the Acclaim, 5.1 mm on the Janome → a wider edge on heavy or fraying fabric only with the Acclaim.
  • Maximum stitch length 4 mm on the Acclaim, 5 mm on the Janome → the Janome sets a longer stitch, useful on bulky fabric.
  • Air-threaded loopers and built-in needle threader on the Acclaim, assisted threading and manual needle threader on the Janome → more hand steps at each thread change on the Janome.
  • 2-thread conversion built in on the Acclaim, with an accessory on the Janome → on the Janome, 2-thread overlock means fitting a part.

Which one to choose

Choose Baby Lock Acclaim if…

Choose the Acclaim if you sew heavy or fraying fabric and want a wide, sturdy edge. Thread changes are quick, with air-threaded loopers (the two arms that carry the lower threads) and a needle that threads itself, and 2-thread conversion is already built in. You give up the rolled-hem lever, which is not among its stitches.

See the Baby Lock Acclaim sheet →

Choose Janome MyLock 644D if…

Choose the Janome if you often finish fine edges: a lever switches it to rolled hem, and differential feed (it sets how much the fabric is pulled or held back under the foot) runs from 0.5 to 2.2, useful on knits that tend to ripple. It also has an adjustable cutting width and a trimmings bin. The trade-off: a needle to thread by hand, loopers threaded with assistance only, and a narrower overlock.

See the Janome MyLock 644D sheet →

Where to buy

Paid link: the price for you does not change.

As an Amazon Associate I earn from qualifying purchases.

The purchase links are the same as on the two product pages and don't influence the verdict. The product pages have the complete data.