Alfa Overlock 8703 vs PFAFF hobbylock 2.5

Technical comparison · Overlockers and sergers

In brief

Two four-thread overlockers. The choice is between the Alfa's speed and longer stitch and the PFAFF's repertoire, which lists ten stitch types, flatlock and 2-thread stitches included.

Parameter
Identity
Use tier F2 — Intermediate F1 — Entry
Price
Price 664 € ~200–450 €
Universal specs
Weight — 8.7 kg
Power 120 W —
Category specs
Maximum threads 4 4
Needles, minimum — 1
Needles, maximum — 2
Stitch types — 4-thread overlock, 3-thread overlock, Narrow 3-thread overlock, 3-thread stretch overlock, 3-thread flatlock, 3-thread rolled hem, 2-thread overlock, 2-thread flatlock, 2-thread wrapped edge, 2-thread rolled hem
2-thread conversion — With accessory
Differential feed ratio (minimum) — 0.6
Differential feed ratio (maximum) — 2
Stitch length (minimum) 1 mm 1 mm
Stitch length (maximum) 5 mm 4 mm
Overlock width (minimum) — 3 mm
Overlock width (maximum) — 7 mm
Looper threading — Manual
Needle threader Manual Manual
Rolled hem conversion — Lever
Retractable upper knife Yes Yes
Knife drive — Upper thread
Adjustable cutting width Yes Yes
Tension system Manual dials Manual dials
Presser foot lift — 4.5 mm
Adjustable presser foot pressure — Yes
Maximum speed 1300 spm 1100 spm
Waste collector — Yes

The differences that matter

  • 1300 against 1100 stitches per minute → long seams go faster on the Alfa
  • 10 stitch types listed for the PFAFF → flatlock and 2-thread hems with the accessory
  • Differential feed 0.6–2 on the PFAFF → you adjust how much fabric advances under the foot

Which one to choose

Choose Alfa Overlock 8703 if…

Choose the Alfa if you sew long overlock seams and speed counts: 1300 stitches per minute against 1100 and stitch length up to 5 mm against 4 (manufacturer's stated values). The trade-off: flatlock, wrapped edge and 2-thread hems are listed only by the PFAFF.

See the Alfa Overlock 8703 sheet →

Choose PFAFF hobbylock 2.5 if…

Choose the PFAFF if you want flatlock, wrapped edge or 2-thread hems, available with the conversion accessory. Overlock width runs from 3 to 7 mm and differential feed (the feed dogs that control how much fabric advances under the foot) from 0.6 to 2. The trade-off: 1100 stitches per minute, stitch length up to 4 mm and 8.7 kg.

See the PFAFF hobbylock 2.5 sheet →

Where to buy

Paid link: the price for you does not change.

As an Amazon Associate I earn from qualifying purchases.

The purchase links are the same as on the two product pages and don't influence the verdict. The product pages have the complete data.