Alfa Overlock 8703 vs Juki MO-1000
Technical comparison · Overlockers and sergers
Two overlockers, the Juki being the higher-end one. The deciding point is threading: the needle is threaded by hand on the Alfa, while the Juki has a built-in needle threader and air-threaded loopers.
| Parameter | ||
|---|---|---|
| Awards | — | |
| Identity | ||
| Use tier | F2 — Intermediate | F3 — Advanced |
| Price | ||
| Price | 664 € | ~1000–2200 € |
| Universal specs | ||
| Dimensions (W×D×H) | — | 33 × 28 × 31 cm |
| Weight | — | 9 kg |
| Power | 120 W | — |
| Category specs | ||
| Maximum threads | 4 | — |
| Needles, minimum | — | 1 |
| Needles, maximum | — | 2 |
| Stitch types | — | 4-thread overlock, 3-thread overlock, 2-thread overlock, 3-thread flatlock, Narrow 3-thread overlock, 3-thread rolled hem |
| 2-thread conversion | — | Built-in |
| Differential feed ratio (minimum) | — | 0.7 |
| Differential feed ratio (maximum) | — | 2 |
| Stitch length (minimum) | 1 mm | — |
| Stitch length (maximum) | 5 mm | — |
| Looper threading | — | Air (jet-air) |
| Needle threader | Manual | Built-in |
| Retractable upper knife | Yes | Yes |
| Knife drive | — | Upper thread |
| Adjustable cutting width | Yes | Yes |
| Tension system | Manual dials | — |
| Presser foot lift | — | 8 mm |
| Adjustable presser foot pressure | — | Yes |
| Maximum speed | 1300 spm | 1500 spm |
| Waste collector | — | Yes |
SewingSpecs Awards
No awards in this tier.
Most capable Advanced
Highest technical score among the 4 sheets in the Overlockers and sergers category (advanced tier): 100/100.
How we assign awards →Best value Advanced
Best balance of technical score and price among the 4 sheets in the Overlockers and sergers category (advanced tier): technical score 100/100. The price used is the sheet's estimated range.
How we assign awards →The differences that matter
- Needle threader: manual vs built-in → on the Juki you do not thread the needle by hand.
- Maximum speed: 1300 vs 1500 stitches per minute, stated values → this is the machine's limit, not the everyday pace.
- Presser foot lift: up to 8 mm on the Juki → thicker layers fit under the foot.
Which one to choose
Choose Alfa Overlock 8703 if…
You sew four-thread with tension dials and a 1 to 5 mm stitch, and you want a disengageable upper knife. The needle is threaded by hand and the stated speed reaches 1300 stitches per minute.
Choose Juki MO-1000 if…
You change thread often: needle and loopers are threaded with the machine's help and 2-thread conversion is built in. The presser foot lifts up to 8 mm, stated speed reaches 1500 stitches per minute, and there are 3-thread flatlock and 3-thread rolled hem. It weighs 9 kg.
Where to buy
Paid link: the price for you does not change.
As an Amazon Associate I earn from qualifying purchases.
The purchase links are the same as on the two product pages and don't influence the verdict. The product pages have the complete data.