Tajima Tajima TMAR-V1512C

Name: Tajima TMAR-V1512C
Brand: Tajima
SKU: TMAR-V1512C
Author: SewingSpecs

Price

Not available

SewingSpecs does not sell and does not show shop prices: check the price where you buy.

Sheet on the Tajima website →

Compare with another machine

Add to my setup

Data from official source

Sheet curated by SewingSpecs — We check every spec sheet against the manufacturer's own documentation: each value carries its source and the date we read it. Published Sept. 17, 2026 · Last updated Sept. 18, 2026 · Data verified Sept. 18, 2026

The TMAR-V1512C is Tajima's high-end multi-head embroidery machine: twelve heads with fifteen needles each, synchronised on the same design, built for logos and marks on finished garments in large quantities rather than single pieces. The Digitally Controlled Presser foot (DCP) measures fabric thickness at every stitch and holds the material steady even on thick leather, very thin fabrics and folds, cutting down on press marks and thread-trimming errors.

The tubular frame is the base setup; the cap frame and the border frame remain separate accessories, with a per-head embroidery space that shrinks accordingly. The 12.1-inch touch panel and the direct switches on each head let operators act without walking back to the central panel, and the new picker-free trimming system speeds up bobbin changes.

This is a production-floor machine: it exceeds five and a half metres in width in the standard-frame configuration, and the three-phase power supply is factory-configured to one of several voltage standards, not switchable after purchase.

01 · Verified data

Technical specifications

Power 700 W

Dimensions 566 × 148 × 170.5 cm (222.8 × 58.3 × 67.1 in)

Parameter	Value	Source
Machine dimensions	566 × 148 × 170.5 cm (222.8 × 58.3 × 67.1 in)	manufacturer website
Power supply	700 W	manufacturer website
Embroidery area, long side	450 mm	Declared by the brand
Needle count	15	Declared by the brand
Embroidery area, short side	360 mm	Declared by the brand
Head count	12	Declared by the brand
Cap frame support	Optional	Declared by the brand
Maximum embroidery speed	1100 spm	Declared by the brand
Optional frame types available	Cap frame, Wide cap frame, Tubular frame, Border frame (large area)	Declared by the brand

02 · Summary

Pros and cons

In favour

The Digitally Controlled Presser foot (DCP) measures fabric thickness at every stitch and reduces fluttering, useful on thick leather and very thin fabrics source
Twelve synchronised heads: output multiplies without multiplying operators
The 12.1-inch touch panel is among the largest in the category and switches operating language machine by machine source
The picker-free trimming system makes bobbin changes easier and shortens thread tails on the back of the fabric source

Worth knowing

Over 5.6 metres wide in the standard-frame configuration: this needs production-floor space, not a small workshop source
The cap frame is an optional accessory, not included
The three-phase power supply is factory-configured to one of six voltage standards: it cannot be switched after purchase source

Compare