Juki LH-3578A-7 — Twin needle
Juki LH-3578A-7 LH-3578A-7
Twin needle F5 · Professional

Juki LH-3578A-7

Price
Not available

SewingSpecs does not sell and does not show shop prices: check the price where you buy.

Sheet on the Juki website →
Add to my setup
Data from official source

The Juki LH-3578A-7 is a two-needle industrial machine with needle feed: the needle moves along with the material as it advances. It has a direct-drive mechanism and a large-capacity hook (the part that forms the stitch with the bobbin thread), 1.8 times the standard size. The thread trimmer is direct-acting and also handles thick thread. The presser foot lifts by hand and with the knee lifter. The hook is lubricated in minute quantity from a tank, and two oiling systems are available.

01 · Verified data

Technical specifications

Parameter Value Source
Maximum speed 3000 spm Compiled by editorial team
Maximum stitch length 5 mm Compiled by editorial team
Presser foot lift (hand) 7 mm Compiled by editorial team
Maximum presser foot lift 13 mm Compiled by editorial team
Needle system DPx5 Compiled by editorial team
Needle size range #16–#23 Compiled by editorial team
Motor and drive Direct drive Compiled by editorial team
Automatic functions Automatic thread trimmer Compiled by editorial team
Feed type Needle feed Compiled by editorial team
Hook capacity Large hook Compiled by editorial team
Needle bar stroke 33.4 mm Compiled by editorial team
02 · Summary

Pros and cons

In favour

  • The hook has a large capacity, 1.8 times the standard size.
  • The mechanism is direct-drive.
  • The thread trimmer is direct-acting and also handles thick thread.

Worth knowing

  • The hook oil tank must be refilled with JUKI New Defrix Oil No.1. source
Updates to this sheet and Manufacturer Notes
  1. Sheet published
  2. Specifications updated: immagine, foto candidate,