bernette 64 AIRLOCK vs Janome MyLock 644D

Technical comparison · Overlockers and sergers

In brief

Two overlockers in the same class, both four-thread, but the bernette 64 AIRLOCK costs more than the Janome MyLock 644D. What decides it is looper threading (the loopers carry the threads under the fabric): air (jet-air) on the bernette, assisted on the Janome.

Parameter
Identity
Use tier F2 — Intermediate F2 — Intermediate
Price
Price ~1000–2200 € 649 €
Category specs
Maximum threads — 4
Needle system ELx705 —
Available stitches 16 —
Stitch types 4-thread overlock, 3-thread overlock, 2-thread overlock, 3-thread stretch overlock, 3-thread flatlock, 2-thread flatlock, Narrow 3-thread overlock, 3-thread rolled hem, 2-thread rolled hem, 2-thread wrapped edge 2-thread overlock, 3-thread overlock, 4-thread overlock
2-thread conversion — With accessory
Differential feed ratio (minimum) — 0.5
Differential feed ratio (maximum) — 2.2
Stitch length (minimum) — 1 mm
Stitch length (maximum) — 5 mm
Overlock width (minimum) 3 mm 3.1 mm
Overlock width (maximum) 7 mm 5.1 mm
Looper threading Air (jet-air) Assisted
Needle threader Manual Manual
Rolled hem conversion — Lever
Adjustable cutting width — Yes
Tension system — Automatic
Free arm Yes —
Space to the right of the needle 130 mm —
Knee lifter Yes —
Maximum speed 1300 spm —
Waste collector Yes Yes

The differences that matter

  • Maximum overlock width 7 mm vs 5.1 mm → the bernette covers wider edges.
  • Looper threading by air (bernette) vs assisted (Janome) → the step you repeat at every thread change is done differently on each.
  • Stitch list: the bernette also declares 2- and 3-thread flatlock, 3-thread stretch overlock and 2-thread wrapped edge, none of which appear in the Janome's list → more finishes declared on the bernette.

Which one to choose

Choose bernette 64 AIRLOCK if…

Knits and different fabrics with frequent thread colour changes, and an overlock up to 7 mm wide: the loopers are threaded with air, and the stitch list includes flatlock and wrapped edge. The trade-off is paying more.

See the bernette 64 AIRLOCK sheet →

Choose Janome MyLock 644D if…

Edge finishing in 2-, 3- or 4-thread overlock on everyday fabrics, for less money. The trade-offs are a narrower overlock, a shorter stitch list, and loopers threaded with assistance rather than air.

See the Janome MyLock 644D sheet →

Where to buy

Paid link: the price for you does not change.

As an Amazon Associate I earn from qualifying purchases.

The purchase links are the same as on the two product pages and don't influence the verdict. The product pages have the complete data.