HUSQVARNA VIKING ONYX 25 vs W6 Wertarbeit W6 N 1235/61
Technical comparison · Mechanical
Between these two entry-level mechanical machines, the difference that matters most is the buttonhole: automatic one-step on the Onyx 25, four-step and hand-adjusted on the W6 N 1235/61.
| Parameter | ||
|---|---|---|
| Identity | ||
| Use tier | F1 — Entry | F1 — Entry |
| Price | ||
| Price | ~200–450 € | 149 € |
| Universal specs | ||
| Dimensions (W×D×H) | — | 39 × 16 × 30 cm |
| Weight | 6.1 kg | 6.172 kg |
| Category specs | ||
| Machine weight | — | 6.172 kg |
| Machine width | — | 390 mm |
| Machine height | — | 300 mm |
| Machine depth | — | 160 mm |
| Power supply | Multi-voltage | — |
| Power consumption | 70 W | 70 W |
| Stitch selection | Dials | Dials |
| Maximum speed | 750 spm | 860 spm |
| Built-in stitches | 32 | 29 |
| Buttonhole type | One-step | Four-step |
| Stitch types | Straight stitch, Triple stretch straight stitch, Zigzag stitch, Three-step zigzag, Blind hem stitch, Stretch blind hem stitch, Elastic overlock stitch | Straight stitch, Zigzag stitch, Three-step zigzag, Stretch blind hem stitch, Triple stretch straight stitch, Triple stretch zigzag |
| Maximum stitch width | 6 mm | 5 mm |
| Maximum stitch length | 4 mm | 4 mm |
| Hook type | — | Vertical oscillating |
| Feed dog pieces | — | 3 |
| Drop feed | Yes | — |
| Needle threader | Semi-automatic | Automatic |
| Automatic thread cutter | No | No |
| Adjustable presser foot pressure | Yes | — |
| Presser foot lift | 6.5 mm | — |
| Free arm | Yes | Yes |
| Thread tension | — | Manual |
| Display | None | — |
| Included presser feet | 8 | — |
| Presser foot attachment | — | Low shank, snap-on |
The differences that matter
- Buttonhole: automatic one-step on the Onyx 25, manual four-step on the W6 N 1235/61 → on the Onyx the size repeats on its own.
- Presser foot shank: snap-on on the W6, unspecified on the Onyx → faster foot changes and compatible with third-party feet.
- Top speed: 860 stitches per minute on the W6 against 750 on the Onyx → a margin on long, repetitive seams.
- Multi-voltage power: only on the Onyx 25 → useful outside the market of purchase or when travelling.
Which one to choose
Choose HUSQVARNA VIKING ONYX 25 if…
The Onyx 25 makes the buttonhole automatically in a single pass with a repeatable size, an advantage in this tier. Maximum stitch width reaches 6mm, useful margin for wider zigzags and hand-finished overcast seams on fraying fabric. It's also multi-voltage, useful outside the market of purchase or when travelling; the needle threader stays semi-automatic and needs guiding by hand for the last stretch.
Choose W6 Wertarbeit W6 N 1235/61 if…
The W6 N 1235/61 sews faster, up to 860 stitches per minute against 750, useful on long, repetitive seams. The needle threader is automatic and the presser foot snaps on: a common system that makes third-party feet compatible and speeds up changes. The buttonhole, though, is made by hand in four steps, so its length depends on the sewer.
Where to buy
Paid link: the price for you does not change.
As an Amazon Associate I earn from qualifying purchases.
The purchase links are the same as on the two product pages and don't influence the verdict. The product pages have the complete data.