Brother GX37 vs PFAFF select 4.2
Technical comparison · Mechanical
The Brother GX37 and the PFAFF select 4.2 are both mechanical machines: no screen and no stored stitches, you pick a stitch with a dial or a button and the machine sews it. What separates them is what each one declares: the GX37 a wider zigzag and a one-step buttonhole, the select 4.2 an 11 kg body, integrated dual feed and feed dogs that drop. This comparison is for someone sewing garments and repairs who has to decide how much machine the work really calls for.
| Parameter | ||
|---|---|---|
| Awards | — | |
| Identity | ||
| Use tier | F1 — Entry | F2 — Intermediate |
| Price | ||
| Price | ~90–200 € | ~450–1000 € |
| Universal specs | ||
| Weight | — | 11 kg |
| Category specs | ||
| Power supply | 110-120 V | — |
| Stitch selection | Dials | Buttons |
| Maximum speed | 850 spm | 900 spm |
| Built-in stitches | 37 | 40 |
| Buttonhole type | One-step | Four-step |
| Buttonhole styles | 1 | — |
| Stitch types | Straight stitch, Zigzag stitch, Blind hem stitch, Three-step zigzag, Stretch blind hem stitch, Triple stretch straight stitch, Triple stretch zigzag, Elastic overlock stitch | Straight stitch, Zigzag stitch, Blind hem stitch, Stretch blind hem stitch, Elastic overlock stitch |
| Maximum stitch width | 7 mm | 5.5 mm |
| Maximum stitch length | 5 mm | 6 mm |
| Space to the right of the needle | — | 173 mm |
| Feed dog pieces | 7 | — |
| Drop feed | — | Yes |
| Dual feed / walking foot system | — | Integrated in the machine |
| Needle threader | Automatic | Semi-automatic |
| Automatic thread cutter | No | No |
| Knee lifter | No | — |
| Adjustable presser foot pressure | No | — |
| Free arm | Yes | — |
| Thread tension | — | Manual |
| Start/stop button | No | — |
| Independent bobbin winder | Yes | Yes |
| Included presser feet | 6 | 8 |
SewingSpecs Awards
Most capable Entry
Highest technical score among the 11 sheets in the Mechanical category (entry-level tier): 79/100.
How we assign awards →Best value Entry
Best balance of technical score and price among the 8 sheets in the Mechanical category (entry-level tier): technical score 79/100. The price used is the sheet's estimated range.
How we assign awards →No awards in this tier.
The differences that matter
- Stitch width: 7 mm on the GX37, 5.5 mm on the select 4.2 — it matters for zigzag, appliqué and satin-stitch edges.
- Buttonhole: one step on the GX37, four steps on the select 4.2.
- Dual feed and droppable feed dogs: declared only by the select 4.2. Brother publishes neither figure for the GX37, so on this point the two cannot be compared.
- Speed: 850 stitches per minute against 900 — a 6% gap, hard to notice in home use.
- Built-in stitches: 37 against 40, though the GX37 declares eight stitch types and the select 4.2 five.
- Weight: 11 kg declared for the select 4.2; no figure published for the GX37.
Which one to choose
Choose Brother GX37 if…
you mostly sew garments and repairs and want a zigzag up to 7 mm wide — 1.5 mm more than the select 4.2 — with the buttonhole done in a single pass instead of turning a dial through four positions. The needle threader is automatic and six presser feet are included.
Choose PFAFF select 4.2 if…
you work with slippery fabric or thick layers: it declares integrated dual feed — the fabric is pulled from above as well as by the feed dogs under the foot — and feed dogs that drop, which is what free-motion quilting and darning need. It weighs 11 kg, enough to keep the machine still when the fabric pushes back, and leaves 173 mm to the right of the needle for bulk.
Where to buy
Paid link: the price for you does not change.
As an Amazon Associate I earn from qualifying purchases.
The purchase links are the same as on the two product pages and don't influence the verdict. The product pages have the complete data.